Example configuration

2 × 12 TE board: compact 1TE FI/LS

Same 2 × 12 TE footprint, but every final circuit gets its own compact 1TE FI/LS: twice the individually protected circuits in the same space.

2 rows
24 TE

Open in the planner Open the house in the room planner

The ready-made configurations are examples that show what the planner can do. We give no warranty that they are correct, complete or functional. They are not designed for any specific installation. A qualified electrician must check every configuration and adapt it to the installation before it is fitted. Terms of use & safety

About this board

The same 2 × 12 TE enclosure as the standard configuration, but the second row uses a compact one-module (1TE) FI/LS instead of the usual 2TE combination breaker: one final circuit per module, each with its own breaker and its own RCD.

Twelve final circuits split evenly across the three phases (four per phase, L1–L3), each on its own residual-current device: a fault on one circuit trips only that circuit, not a shared upstream RCD covering several rooms. The main switch, four branch terminals for the phase feed-through, and the board’s neutral bus sit on the first row.

This layout works with any manufacturer that makes a 1TE FI/LS.

Other sizes

Need something else? Build your own in the planner.