Example configuration
Preconfigured 4 × 12 TE sub-distribution board
Large single field: four rows of 12 modules. Built for bigger homes with a wallbox or heat pump.
- 4 rows
- 48 TE
The ready-made configurations are examples that show what the planner can do. We give no warranty that they are correct, complete or functional. They are not designed for any specific installation. A qualified electrician must check every configuration and adapt it to the installation before it is fitted. Terms of use & safety
About this board
48 module slots on four DIN rails in one field, a step up from the standard 3 × 12 TE board for a larger single-family home or higher electrical demand.
The fourth row carries its own type-B RCD, sized for the DC fault currents an EV charger or a heat pump inverter can produce, plus a contactor for load management.
Other sizes
- 2 × 12 TE
- 2 × 12 TE kompakt
- 2 × 12 TE kompakt + Phönix
- 3 × 12 TE
- 4 × 12 TE
- 2 × 3 × 12 TE
- 2 × 4 × 12 TE
- 5 × 12 TE + 2 UV
Need something else? Build your own in the planner.